Model No.: HP100, HP200, HP300, HP400, HP500, HP800, HP3, HP4, HP5, HP6, HP7, HP8
Including: locking screws, hopper, cone, sphere, cone, adjusting ring main frame, spherical tile, dynamic cone bushing, transmission shaft, the transmission shaft sleeve, main shaft, eccentric thrust bearing, counterweight plate, iron release assembly, eccentric bushing, eccentric sleeve, pneumatic cone cone, cone liner, liner, fixed cone liner, hydraulic motor, locking cylinder, cutting ring, disc feeder, gear ring, T seal, horizontal copper sleeve, horizontal axle and so on.
The customer can also order the assembly at a favorable price. It includes main frame assembly, fixed cone assembly, moving cone assembly, spherical tile assembly, eccentric sleeve assembly, counterweight assembly, gear assembly, adjusting ring assembly, horizontal shaft assembly and so on.
The applicable models are: HP100, HP200, HP300, HP400, HP500, HP800, HP3, HP4, HP5, HP6, HP7, HP8;
GP11F, GP11M, GP100, GP200, GP300, GP550;
GP100S, GP200S, GP300S, GP500S
As one of the most important parts of cone crusher machine, spindle and spindle bushing, the two would like our teeth and tongue, if the cone crusher and bushing improper assembly, in the operation of the equipment will lay great security risks, such as locking, failure caused spindle speed. This article mainly introduces the installation of the main bushing of the cone crusher, so as to ensure the good contact between the components and reduce the occurrence of the fault of the flying car of the cone crusher.
1. Check the epoxy resin locking packing in the top chute of the eccentric sleeve has been cleaned up. The surface of the eccentric sleeve hole is clean, thoroughly cleaning the surface of the bushing and removing the surface unqualified parts.
2, put dry ice in the lining of the lining to make the bushing shrink. If a 100x100 rod is placed in the center of the bushing, 90kg dry ice will be filled into the inner cavity of the bushing, leaving enough space for putting enough dry ice to cool the bushing.
3, wrap a few layers of glass fiber insulation layer outside the bushing to avoid the outer frosting of the bushing, and the wrapping layer also helps to cool down more fully. After cold shrink 2h, the outer diameter of the bushing and the inner diameter of the eccentric sleeve are measured, and it is confirmed that the bushing has been fully cooled.
4, the two ring bolt is screwed into the sleeve top, with ring bolt and washer bushing connected in alignment, the eccentric sleeve top and eccentric sleeve hole, quickly shrink into the inner hole of the eccentric sleeve bushing, of groove and hole, pay attention to lubricating oil on the Bush hole must be with the corresponding the hole on the eccentric sleeve is completely on.
5. When the bushing is installed, the top of the bushing should be flat with the top of the eccentric sleeve. Then, according to the instructions of epoxy resin, the epoxy resin and the curing agent are mixed according to the ratio and operation requirements, and then poured into the groove of the eccentric sleeve and the top of the bushing. Before filling the locking packing, the eccentric sleeve and the epoxy resin locking filler should be controlled at room temperature 16-30 degrees. When the locking filler is completely hardened, the outstanding locking packing can be grind out.
Shenyang YYD Casting Co,. Ltd.
- Shenyang YYD Casting Co.,Ltd is founded in 1997,located in Shenyang the heavy industry base of the whole nation, the political, economic and cultural center of northeast China. The foundry covers a total area of 22000 square meters ,a productive area of casting shop of 3400 square meters with the biggest jack lift of 20t and a maximum diameter of 5 meters for centrifugal castings produced. High-lead bronze castings employ new centrifugal casting process with maximum melting weight of 15t. It has a complete set of equipments and a powerful strength with an annual productive capacity of more than 2800t. YYD`s high-quality technology equipments for casting special use include many sets of large vertical, double-head, carrying idler, and single-head centrifugal casting machines. These manufacturing equipments have basically met the demands of centrifugal casting of revolving castings used for medium an large-sized enterprises at home. For special shaped castings, sand casting or metal mould casting process can also be employed accordingly. To ensure a better quality of sand mould drying, one 50m³ and one 30m³ desiccation kilns have been constructed which can real-time monitor temperature. Machining equipments include horizontal lathe, vertical lathe, planer, boring lathe, millers and drillers of various types, among which new equipments make up over 90%, providing reliable support for the products machining. Based on ISO19001 international quality system certification, our foundry has perfected an entire complete set of management system and guaranteed high quality and high reputation of products produced, thus providing powerful foundation for stepping into the big family of the world.
- Our company is located in Shenyang, which is the national heavy industry base of China and the political, economic and cultural center in the Northeast of China. Our factory covers an area of 28000 square meters, among which our foundry workshop covers 5200 square meters and our machine processing workshop covers 4600 square meters. In 2002, we got the certificate of ISO9001. We are a manufacturer specialized in all kinds of copper bushings, crusher parts, big centrifugal bushes, worm wheels, nuts and so on. With a wide range, good quality, reasonable prices and stylish designs, our products are extensively used in Mining and Quarry (Crushers and ball mills), Hydroelectricity (Hydro Equipment), Cement Equipment (Rotary Kilns and Lime Kilns), Forged and Steel Rolling (Nuts, Screws and bushings), and other industries. We always supply bushings and other parts of cone crushers and imported crushers (Metso, Sandvik, Nordberg, Svedala, etc.) for Metallurgical Mines, Non-ferrous Mines and Ore Mines. We also supply copper bearing bushes, Labyrinth Sealing Rings and copper upper-retaining rings for GE Hydro, Andritz Hydro, Alstom Hydro, Vioth Hydro and Rainpower Hydro. Our products are widely recognized and trusted by users and can meet continuously changing economic and social needs. We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success!
- Company Name: Shenyang YYD Casting Co,. Ltd.
- Representative: SUNYING
- Product/Service: Copper Bushing , Crusher Spare Parts , High Lead Bronze , Eccentric Bushing , Head Bushing , Cone Crusher Bushing
- Capital (Million US $): US$2 Million
- Year Established: 1997
- Total Annual Sales Volume (Million US $): US$10 Million - US$50 Million
- Export Percentage: 11% - 20%
- Total Annual Purchase Volume (Million US $): Below US$1 Million
- No. of Production Lines: 108
- No. of R&D Staff: 21 -30 People
- No. of QC Staff: 11 -20 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 30,000-50,000 square meters
- Factory Location: No. 168, YalujiangNorthStr.Huanggu District，Shenyang,China
- Contact Person: Mr. Jeson
- Tel: 86-24-86670185