Model No.: 259
The hydraulic power unit adopts a closed structure, that is, the rear service hydraulic oil power unit, which is used for the steering and lifting control of the truck's rear baffle. AC hydraulic pump, expansion and descent speed is controlled by one-way throttle valve. Small hydraulic power unit.
Hydraulic Poppet Valve
Hydraulic Pilot Valve
Model and specification
|type型号||electric machinery电机|| |
t泵排量（cc / r）
|1.7||9||20|| 卧式 || |
Hydraulic Power Station
1, For different flow rates of pumps, pressures and motor power, please see the ordering guide.
2. The motor is based on gap working system S2 = 2 ~ 4min (continuous working time), so it cannot run continuously.
3. Before installation, the cylinder, tubing, joints and other hydraulic components must be cleaned without any impurities.
4, the viscosity of hydraulic oil should be 15-68CST, and should be clean without impurities, it is recommended to use HM46 hydraulic oil.
5. If emergency manual oil discharge device is needed, please indicate it at the time of reservation.
6. After the first operation of the system, check whether there is enough oil in the tank immediately.
7. The hydraulic oil shall be replaced after the first 100 hours * of use of the system and thereafter every 3,000 hours.
8. Hydraulic valve of dump truck
Hydraulic Pump Unit
Changzhou Satidi Import and Export Co., Ltd.
As a scientific and technological enterprise integrating r&d, production, sales and service, the company has strong technical strength, advanced production equipment, perfect quality system and powerful production capacity
- Company Name: Changzhou Satidi Import and Export Co., Ltd.
- Representative: wangrong
- Product/Service: Textile machinery , USB Cable , Sun Shade Net , Hydraulic Power Unit , Anti Bird Net , Electric Bike
- Capital (Million US $): 1080000RMB
- Year Established: 2011
- Total Annual Sales Volume (Million US $): Below US$1 Million
- Export Percentage: 1% - 10%
- Total Annual Purchase Volume (Million US $): Below US$1 Million
- No. of R&D Staff: Fewer than 5 People
- No. of QC Staff: 5 -10 People
- Factory Size (Sq.meters): Below 1,000 square meters
- Factory Location: No. 3, Chuangyan Lane, Hutang, Wujin District, Changzhou City
- Contact Person: Mr. xueanzhi
- Tel: 86--17767056619