This power unit is specially designed for the vertical tailboard of freight van, with DC12V, DC24V, DC48V and other kinds of electric voltage levels.Electrically power rise, gravity fall, and fall speed is controlled by pressure compensating flow control valve.
|Type 型号||Motor 电机|| |
DC24V 1.2Kw 3200rpm
1、 For different flow rate pump, pressure and motor power, please check the ordering guidance.
2、 This motor is based on gap working system S2=2 ~ 4min(continuous working time), so it cannot run continuously.
3、 Before installation, the cylinder, oil pipe, joint and other hydraulic components must be cleaned and free from any impurities.
4、 The viscosity of hydraulic oil should be 15-68cst and should be clean and free of impurities.HM46 hydraulic oil is recommended.
5、 If you need manual oil discharge device for emergency , please specify when ordering.
6、 Check that whether there is enough oil in the oil tank immediately after the first operating of the system.
7、 The hydraulic oil should be replaced after the first 100 hours* use of the system, and change the oil every 3,000 hours after that.
CHANGZHOU ROHN HYDRAULIC SCI-TECH CO.,LTD
We are devoted to hydraulic power unit for 10 years, In addition, we also produce various circuit block, hydraulic accessories as well as provide professional services for the customers.We accept customized. The company was found in May 2011, it's located in Yongxin Road No58 Panjia Xueyan Town Wujin District Changzhou Jiangsu Province China. We are devoted to self
- Company Name: CHANGZHOU ROHN HYDRAULIC SCI-TECH CO.,LTD
- Representative: LVJUN
- Product/Service: Hydraulic Power Unit , Hydraulic Pump Unit , Hydraulic Power Station , Power Unit , Hydraulic Poppet Valve , Hydraulic Pilot Valve
- Capital (Million US $): 200万元整
- Year Established: 2016
- Total Annual Sales Volume (Million US $): US$1 Million - US$2.5 Million
- Export Percentage: 11% - 20%
- Total Annual Purchase Volume (Million US $): US$1 Million - US$2.5 Million
- No. of Production Lines: 20
- No. of R&D Staff: Fewer than 5 People
- No. of QC Staff: 21 -30 People
- Factory Size (Sq.meters): Below 1,000 square meters
- Factory Location: No.13, Kuanda Road, Xueyan Town, Wujin District, Changzhou city
- Contact Person: Mr. songwei
- Tel: 86-519-86056606